Skip to content

Reef Media Reactors: Four Designs and How to Choose One

A media reactor directs aquarium water through a chosen filtration medium. For reef tanks, common choices include phosphate-binding media and activated carbon. A reactor is useful when you need controlled contact with a specific medium; it is not mandatory equipment for every reef.

Test the parameter you intend to change before buying or adding media. The medium determines what is removed, while the reactor determines how water passes through it.

Four reactor designs

Two Little Fishies PhosBan Reactor 150

The manufacturer’s instructions specify up to 200 grams of PhosBan and approximately 20–30 gallons per hour of operating flow. The pump and hose are separate. This is the flow through the loaded reactor, not a pump’s unrestricted maximum rating.

Too much flow can grind PhosBan. The manual places flow control on the inlet and warns that restricting the outlet can pressurize the reactor and cause leaks. Follow its media-depth and assembly instructions rather than filling the chamber arbitrarily.

Aquatop MR-20

Aquatop’s current MR-20 listing specifies a 95-gallon-per-hour pump, included tubing and mounting hardware, and suitability for tanks up to 20 gallons. Its body is 2.4 inches in diameter and 15 inches tall. Check this model carefully rather than applying a larger MR-series rating.

The supplied pump’s maximum rate is not automatically the correct operating flow for every medium. Set up and maintain the reactor according to both the reactor and media instructions.

Innovative Marine MiniMax Desktop

The pictured MiniMax is an earlier Desktop model. The MiniMax Pro Desktop listing describes an integrated pump, removable inner cartridge and adjustable flow. Its stated dimensions are 2.3 by 3.25 by 13 inches, with a maximum media capacity of 150 ml.

Measure your rear filtration chamber or sump, including space to lift out the cartridge. Compare exact generations before ordering replacements; a similar product name does not confirm identical fit.

Reef Octopus MF300B

CoralVue’s MF300B description lists a feed pump, hoses and fittings, with mounting over rims up to one inch thick. It identifies activated carbon, GFO and similar media as uses. Verify the included pump and the media manufacturer’s required flow before installation.

Choose and operate the medium deliberately

Phosphate-binding media is for phosphate control; carbon serves different purposes. Biopellets are a separate biological approach with their own operating requirements. Do not assume all three require the same tumbling, retention screens or replacement schedule.

Start with the media maker’s dose and rinsing instructions, then test and observe the aquarium. Avoid chasing a zero phosphate reading or making abrupt changes simply because the reactor has unused capacity. Address feeding, trapped debris and maintenance alongside chemical filtration.

Before purchase, check total cost with the pump, tubing, media and replacements included. Allow access for cleaning, inspect seals and fittings, and keep the return secure. A sump can make servicing easier, but a reactor still needs regular attention. Combine it with a consistent maintenance routine and appropriate nutrient export, such as a managed refugium, when suitable for your system.

BYA Editorial Staff

Experienced fishkeeping and aquarist professionals curate our editorial team, providing top-tier category expertise.

More to explore

Swipe to explore →

Leave a Reply

Your email address will not be published. Required fields are marked *